LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Manual A/C-Heater Systems - HVAC) >> Air Conditioning (A/C) Cycling Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing A/C Cycling Switch
G01162269Courtesy of MAZDA MOTORS CORP.
  1. Remove the A/C cycling switch.
    1. Disconnect the A/C cycling switch electrical connector.
    2. Remove the A/C cycling switch.
  2. To install, reverse the removal procedure.
    1. Lubricate the O-ring seals with PAG Compressor Oil.
scientia non olet · About LEMON Manuals