LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Manual A/C-Heater Systems - HVAC) >> Air Conditioning (A/C) Compressor Bracket >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drive belt. For additional information, refer to BELT ROUTING .
    Fig 1: Disconnecting/Connecting A/C Clutch Field Coil Electrical Connector
    G01162238Courtesy of MAZDA MOTORS CORP.
  2. Disconnect the A/C clutch field coil electrical connector.
    Fig 2: Removing/Installing A/C Compressor Bolts & Positioning Aside
    G01162239Courtesy of MAZDA MOTORS CORP.
  3. Remove the bolts and position the A/C compressor aside.
    Fig 3: Removing/Installing Nuts, Bolts, & The A/C Compressor Bracket
    G01162240Courtesy of MAZDA MOTORS CORP.
  4. Remove the nuts, the bolts, and the A/C compressor bracket.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals