Open circuit
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
- EVAP system leak detection pump terminal C and PCM terminal 32*1 , 3V*2
- EVAP system leak detection pump terminal D and PCM terminal 94*1 , 3Y*2
- EVAP system leak detection pump terminal A and main relay terminal C
- EVAP system leak detection pump terminal B and the body GND
*1: California emission regulation applicable ATX model
*2: Except for California emission regulation applicable ATX model