Bracket Installation Note (California emission regulation applicable ATX model)
WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Install bracket A using bolts A and tighten to the Specified torque.
Tightening torque 38-51 N.m {3.9-5.2 kgf.m, 29-37 ft.lbf}
- Temporarily install bracket B using bolts B.
- Tighten bolts B to the Specified torque.
Tightening torque 38-51 N.m {3.9-5.2 kgf.m, 29-37 ft.lbf}