LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Engine Mechanical (Service Information AJ)) >> Timing Chain Removal/Installation >> Cylinder Head Cover (LH) Installation Note

Cylinder Head Cover (LH) Installation Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply silicone sealant to the mating faces as shown.
  2. Install the cylinder head cover with a new gasket.
    Fig 1: Applying Silicone Sealant To Mating Faces
    G03643742Courtesy of MAZDA MOTORS CORP.
  3. Tighten the bolts in the order shown.
    Fig 2: Identifying Tightening Order Of Cylinder Head Cover Bolts
    G03643743Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals