LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Engine Mechanical (Service Information AJ)) >> C7YLINDER Head Gasket Replacement >> Water Bypass Tube Removal Note

Water Bypass Tube Removal Note

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the water bypass tube stud bolt and bolt, and disconnect the water bypass tube from the cylinder head.
    Fig 1: Identifying Water Bypass Tube Stud Bolt And Bolt
    G03643748Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals