LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Engine Mechanical (Service Information AJ)) >> C7YLINDER Head Gasket Replacement >> Notes

C7YLINDER Head Gasket Replacement: Notes

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.
  • Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure". (See FUEL LINE SAFETY PROCEDURE .)
  1. Drain the engine coolant. (See COOLING SYSTEM SERVICE WARNINGS .)
  2. Remove the water pump. (See WATER PUMP REMOVAL/INSTALLATION .)
  3. Remove the timing chain. (See TIMING CHAIN REMOVAL/INSTALLATION .)
  4. Install the oil pan. (See OIL PAN REMOVAL/INSTALLATION .)
  5. Secure the engine and the transaxle using an engine jack and attachment as shown.
  6. Remove in the order indicated in the table.
    Fig 1: Securing Engine And Transaxle
    G03643746Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
    Fig 2: Exploded View Of Cylinder Head (Torque Specs)
    G03643747Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals