Lumber Support Lever Disassembly Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Remove the pin from the lumber support lever installation part with rag.

Fig 1: Removing Pin From Lumber Support Lever

Courtesy of MAZDA MOTORS CORP.

Side cover disassembly note

Remove the screws.

Fig 2: Disassembling Side Cover
Courtesy of MAZDA MOTORS CORP.
Disengage A clips.
Lift the side cover up in the direction of the arrow, then unhook it from slide adjuster.