Wheel Bearing - 2WD: Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Wheel Bearing Into Wheel Knuckle

Courtesy of MAZDA MOTORS CORP.

Using the special tools, install the wheel bearing into the wheel knuckle.

Fig 2: Installing Snap Ring
Courtesy of MAZDA MOTORS CORP.
Install the snap ring.

Fig 3: Installing Wheel Hub Into Wheel Bearing
Courtesy of MAZDA MOTORS CORP.
Using the special tool, install the wheel hub into the wheel bearing.

Fig 4: Installing Wheel Hub Nut
Courtesy of MAZDA MOTORS CORP.
Install the wheel hub nut.
Install the brake drum. Refer to REAR BRAKE DRUM .