LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 316 (Engine Controls - Trouble Shooting - With & Without Codes) >> On-Board Diagnostic Tests - WDS >> On-Board Diagnostic Test >> Diagnostic Monitoring Test Results Access Procedure >> After Repair Procedure [Kl]

After Repair Procedure [Kl]

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located on the left side of the center console.
    Fig 1: Identifying DLC-2 16-Pin Connector
    G01898257Courtesy of FORD MOTOR CO.
  2. Cycle the ignition key from OFF to ON.
  3. Record DTC if retrieved.
  4. Erase all diagnostic data by WDS or equivalent.