Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Floor Console Front Finish Panel

Courtesy of MAZDA MOTORS CORP.

Remove the floor console front finish panel.
1. Remove the manual transaxle shifter knob by turning counterclockwise.
2. Remove the floor console front finish panel.
  
  Fig 2: Removing Floor Console Rear Finish Panel
  Courtesy of MAZDA MOTORS CORP.
Remove the floor console rear finish panel.
1. Apply the parking brake.
2. Remove the floor console rear finish panel.
  
  Fig 3: Removing Floor Console Front Bolts
  Courtesy of MAZDA MOTORS CORP.
Remove the floor console front bolts.

Fig 4: Removing Rear Bolts And Floor Console
Courtesy of MAZDA MOTORS CORP.
Remove the two rear bolts and the floor console.
To install, reverse the removal procedure.