Removal and Installation

WARNING: This page is about a different car, the 2003 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Remove the fender splash shield. refer to FENDER SPLASH SHIELD .

Fig 1: Removing Fender Moulding Pin-Type Retainer
Courtesy of MAZDA MOTORS CORP.
Remove the fender molding pin-type retainer.

Fig 2: Releasing Moulding Retaining Clips From Inside Fender
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Release the molding retaining clips from inside the fender.
Remove the fender molding.
To install, reverse the removal procedure.