LYSHOLM Compressor (MILLENIA 2.3L): Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before installing Lysholm compressor, temporarily use double sided tape to hold rubber pad to bottom of compressor.
Install components in reverse order of removal. Use NEW gaskets. Be sure intake manifold bolts are tightened in sequence to specification. See Fig 1. See TORQUE SPECIFICATIONS . Ensure hose clamps are positioned correctly to prevent interference with other hoses or wiring harnesses. Partially tighten air intake pipe bolts. Retighten bolts to specification in a crisscross pattern.