LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Fuel System Pressure Release >> Except B2300, B3000, B4000 & Tribute 3.0L

Except B2300, B3000, B4000 & Tribute 3.0L

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel filler cap to relieve tank pressure. Remove fuel pump relay (disconnect harness connector from fuel pump relay on Miata). See FUEL PUMP RELAY LOCATION  table. Start engine. Allow engine to run until it stalls. Turn ignition switch off. Reinstall relay.

FUEL PUMP RELAY LOCATION

Application Location
Miata Above Accelerator Pedal
Millenia 2.3L Beside Cruise Control Actuator
Millenia 2.5L, MPV, Protege, Protege5 & 626 Left Side Of Engine Compartment In Main Fuse & Relay Box
Tribute 2.0L Under Hood, Inside Left Relay Compartment