LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Fuel Pump >> Removal (Millenia)

Removal (Millenia)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Remove fuel tank. Disconnect both fuel lines and 4-pin harness connector from sending unit assembly. Using Fuel Sender Wrench (49-U014-001), turn locking retainer ring counterclockwise. See Fig 1. Remove lock ring. Remove fuel pump and sending unit assembly.

Fig 1: Identifying Fuel Sender Wrench (Millenia)
G00143756Courtesy of MAZDA MOTORS CORP.