LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation (Millenia, Protege, Protege5 & 626)

Removal & Installation (Millenia, Protege, Protege5 & 626)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Release fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE .
  2. Disconnect vacuum and fuel hose(s) from regulator. Remove regulator mounting bolts. Remove regulator and "O" ring from fuel rail.
  3. To install, reverse removal procedure. Using NEW "O" ring. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals