Removal & Installation (Miata)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Remove intake manifold bracket, located on right side of engine. Disconnect Knock Sensor (KS) harness connector. Using tool (49-H018-001), remove and install sensor. See Fig 1. To complete installation, reverse removal procedure.