Installation (B2300)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Install Crankshaft Position (CKP) sensor, but do not tighten mounting bolts. Adjust CKP sensor with Crankshaft Position Sensor Alignment Jig and tighten bolts to specification. See Fig 1. See TORQUE SPECIFICATIONS . Connect CKP sensor harness connector. Remove Timing Pin. Remove Crankshaft Timing Peg and reinstall plug (bolt).