LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Controls - Removal, Overhaul & Installation) >> Air Induction Systems >> Upper Intake Manifold >> Removal (B2300)

Removal (B2300)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Disconnect Throttle Position (TP) sensor, Manifold Absolute Pressure (MAP) sensor and Idle Air Control (IAC) valve. Remove air cleaner outlet tube. Remove splash shield and disconnect accelerator and cruise control (if equipped) cable(s). Disconnect harness connectors, vacuum hoses and vapor hose from throttle body.
  2. Disconnect vacuum and wiring harnesses and position out of way. Disconnect and plug coolant hose from intake manifold. Disconnect fuel line from retainer clip. Remove electronic EGR tube and valve. Disconnect Knock Sensor (KS). Disconnect Power Steering (P/S) pump reservoir and position out of way. Evenly loosen 5 bolts and remove upper intake manifold.
scientia non olet · About LEMON Manuals