Upper Intake Manifold: Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
Inspect intake manifold gasket and replace if necessary. Install intake manifold and 5 mounting bolts. Tighten bolts evenly to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
Reinstall upper intake manifold using NEW gasket. Tighten upper intake manifold bolts evenly in sequence and 2 passes. See Fig 1. Tighten to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.