LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Fuel System Pressure Release >> Miata, Millenia, MPV, Protege, Tribute 2.0L & 626

Miata, Millenia, MPV, Protege, Tribute 2.0L & 626

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect fuel pump relay. See FUEL PUMP RELAY LOCATION  table. Start engine. Allow engine to run until it stalls. Turn ignition off. Reinstall relay.

FUEL PUMP RELAY LOCATION

Application Location
Miata Above Accelerator Pedal
Millenia 2.5L, MPV, Protege & 626 Underhood Relay Panel
Millenia 2.3L Beside Cruise Control Actuator
Tribute 2.0L Under Hood, Inside Left Relay Compartment