LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Removal, Overhaul & Installation) >> Air Induction Systems >> Upper Intake Manifold >> Removal & Installation (Millenia 2.3L)

Removal & Installation (Millenia 2.3L)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove dynamic chamber cover. Remove charge air cooler air duct and air cleaner assembly. Remove fresh air duct and connecting air duct. Remove mass airflow sensor and air intake hose.
  2. Remove air resonator. Remove right and left air charge air coolers with connecting hoses (if needed) from air intake pipe assembly. Disconnect accelerator cable. Remove EGR valve. Disconnect vacuum lines and harness connector from air intake pipe assembly. Remove air intake pipe assembly.
  3. To install, replace upper intake manifold gasket (if necessary). Install upper intake manifold bolts and tighten in crisscross pattern to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals