Removal & Installation (Tribute)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Mazda Tribute, 2001 Mazda Protege, 2001 Mazda Millenia, 2001 Mazda MX-5 Miata, and 2001 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Remove air cleaner outlet tube. Disconnect accelerator and cruise control cable (if equipped). Disconnect throttle position sensor connector. Remove throttle body screws and throttle body. To install, reverse removal procedure.