Cooling System Flushing

WARNING: This page is about a different car, the 2003 Mazda Tribute, 2002 Mazda Tribute, and 2001 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Drain the cooling system. refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
Remove the water thermostat. Refer to THERMOSTAT - 2.0L ZETEC .
Install the water hose connection without the water thermostat.
NOTE:
- Refer to the Pro Flush and FILL, Coolant Flush and Fill operating instructions for specific vehicle hook-up.
Using the special tools, flush the engine and radiator.
Use premium cooling system flush.
Install the water thermostat.
Backflush the heater core if necessary.
Fill the cooling system. refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .