Fuel-Filler Lid Adjustment

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

If not as specified, loosen the fuel-filler lid installation bolts, and reposition the fuel-filler lid.
Measure the gap and height difference between the fuel-filler lid and the
Clearance
1. a: 2.0-4.0 mm {0.079-0.15 in}
2. b: -1.5-0.5 mm {-0.068-0.019 in}
Fig 1: Identifying Fuel-Filler Lid Measurements
Courtesy of MAZDA MOTORS CORP.
Tighten the bolts.