LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Controls - System & Component Testing) >> System Tests (Evaporative Emission) >> Canister Vent Solenoid Closing Procedure

Canister Vent Solenoid Closing Procedure

WARNING: This page is about a different car, the 2002 Mazda Tribute, 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The Canister Vent (CV) solenoid must not be energized for more than nine minutes at one time. Once the CV solenoid is energized and de-energized, adequate time must be allowed for the component to cool adequately. Failure to allow the component to cool may create a false failure in the diagnostics, causing unnecessary repairs.
  1. Connect the WDS or equivalent Tester and select the output test mode.
  2. Select the EVAPCV PID.
  3. Select the ALL OFF mode.
  4. Close the canister vent solenoid by pushing the START button on the WDS or equivalent Tester.
scientia non olet · About LEMON Manuals