Apex Seal Spring
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 Mazda RX-8, 2010 Mazda RX-8, 2009 Mazda RX-8, 2008 Mazda RX-8, and 2007 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Inspect the long apex seal spring.
- Measure the height of the apex seal spring using a vernier caliper with the spring placed on a surface plate.
- If it is less than the minimum specification, replace the apex seal spring.
Standard Height
- 5.4 mm {0.213 in}
Minimum Height
- 3.5 mm {0.148 in}