Water Inlet Tube Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: When replacing a cylinder block that has no water inlet tube.

Apply silicone sealant to the water inlet tube as indicated in the figure.
Thickness

2.0 mm {0.079 in}
Install the water inlet tube using the SST .

Fig 1: Installing Water Inlet Tube
Courtesy of MAZDA MOTORS CORP.