LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Mechanical - Overhaul - (AJ W/VVT)) >> Timing Chain Disassembly >> Water Pump Drive Pulley Disassembly Note

Water Pump Drive Pulley Disassembly Note

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace part A of the SST  [303-009 (49 UN30 3009)] with the SST  [303-457 (49 UN30 3457)].
    Fig 1: Assembling SST
    G02831243Courtesy of MAZDA MOTORS CORP.
  2. Remove the water pump pulley using the SSTs  .
    Fig 2: Removing Water Pump Pulley
    G02831244Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals