LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Mechanical - Overhaul - (AJ W/VVT)) >> Cylinder Block Assembly (II) >> Oil Strainer Assembly Note

Oil Strainer Assembly Note

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the bolts.
  2. Tighten the nut in two steps.
    1. Tighten to 15.0 N.m {153 kgf.cm, 133 in.lbf}  .
    2. Tighten 45 °  using the SST.
      Fig 1: Tightening Oil Strainer Nut
      G02831325Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals