LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Mechanical - Overhaul - (AJ W/VVT)) >> Cylinder Block Assembly (II) >> Flywheel (MTX), Drive Plate (ATX) Assembly Note

Flywheel (MTX), Drive Plate (ATX) Assembly Note

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Mazda 6, 2007 Mazda 6, 2006 Mazda 6, 2005 Mazda 6, and 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the flywheel (MTX) or the drive plate (ATX) using the SST  .
    Fig 1: Holding Flywheel (MTX) Or Drive Plate (ATX)
    G02831322Courtesy of MAZDA MOTORS CORP.
  2. Tighten the bolts in the order indicated in the figure in several passes.
scientia non olet · About LEMON Manuals