Miata, Protege, Protege5 & 626
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect clutch switch connector. Remove clutch switch. Using ohmmeter, check continuity between switch terminals. With clutch rod released, continuity should be present. With clutch rod depressed, continuity should not be present. If continuity is not as specified, replace clutch switch. If continuity is as specified, check for open or short circuit in wire harness. Repair or replace wire harness as necessary.