LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Engine Controls - System & Component Testing) >> Emission Systems & Sub-Systems >> Fuel Evaporative System (Except MPV) >> Catch Tank (Miata, Protege, Protege5 & 626)

Catch Tank (Miata, Protege, Protege5 & 626)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mazda Protege5, 2002 Mazda Protege, 2002 Mazda Millenia, 2002 Mazda MX-5 Miata, and 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Remove catch tank. See CATCH TANK LOCATIONS  table. Plug one port and apply small amount of air pressure into other port on catch tank. Check for leaks. Replace catch tank if any leaks are present.

CATCH TANK LOCATIONS

Application Location
Miata Right Side Strut Area Of Engine Compartment
Protege & Protege5 Right Rear Corner Of Engine Compartment
626 Left Rear Of Engine Compartment