Fifth Gear: Operation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- With shift solenoid B OFF, spring force is applied to the upper end of shift valve B, and shift valve B is positioned on the lower side.
- With shift solenoids A and C ON, pilot pressure is applied to every bottom end of shift valve A, and shift valve C is positioned on the upper side.
- Line pressure is applied to the 2-4 accumulator, and engages the 2-4 brake through shift valve B, and shift valve A.
- Line pressure is applied to the high clutch accumulator, and engages the high clutch through shift valve B, shift valve C, and shift valve A.
- Line pressure is applied to the direct clutch accumulator, and engages the direct clutch through shift valve B and shift valve A.
- Line pressure delivered to the pressure regulator valve is sent to the torque converter through the TCC control valve as torque converter pressure.