Second Gear
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Each shift solenoid is set to second gear mode. Pilot pressure is applied to the bottom end of shift valves A, B, and shift valves A, B are positioned on the upper side. Conversely, shift valve C is positioned on the down side by spring force. Line pressure (1) flows through shift valve B and is applied to the low clutch (oil passage (35)). Also, line pressure (1) flows through shift valve C and is applied to 2-4 brake acting through shift valve A (oil passage (37)). Line pressure (5) is applied to the reduction brake flowing through shift valve B (oil passage (34)).