Forth Gear
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Each shift solenoid is set to forth gear mode. Pilot pressure is applied to the bottom end of shift valve C and positioned on the upper side. Conversely, shift valve A and B is positioned on the down side by spring force. Line pressure (1) flows through shift valve B and acts through the shift valve A and is applied the 2-4 brake (oil passage (37)). Conversely, line pressure (32) flows through shift valve C and acts through the shift valve A and is applied to the high clutch (oil passage (23)). Line pressure (5) flows through shift valve A and acts through shift valve B and is applied to the reduction brake (oil passage (38)).