LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Automatic Transaxle - Overhaul [Ja5EL]) >> 2-4 Brake, Low And Reverse Brake Pre-Inspection >> Clutch Operation Inspection

Clutch Operation Inspection

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Using compressed air can cause dirt and other particles to fly out, causing injury to the eyes. Wear protective eye wear whenever using compressed air.
CAUTION: Applying compressed air to the assembled clutch pack for longer than 3 seconds at a time will damage the seal. Do not apply compressed air for more than the aforementioned time when testing the system.
  1. Inspect operation of the brake piston by applying compressed air as shown.
    • If the operation is abnormal, replace parts where necessary.

    Air Pressure 

    390 kPa {4.0 kgf/cm 2  , 57 psi} max. 

    Fig 1: Inspect Brake Piston Operation
    G02291560Courtesy of MAZDA MOTORS CORP.