LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 238 (Automatic Transaxle - Overhaul [Ja5EL]) >> 2-4 Brake, Low And Reverse Brake Assembly >> Assembly Procedure >> Notes

Assembly Procedure: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 Mazda MPV, 2005 Mazda MPV, 2004 Mazda MPV, 2004 Mazda 6, and 2003 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: After installing the piston, ensure that piston rotates smoothly by hand. If not, the lip seal may be caught.
    Fig 1: Installing Seal Ring & O-Ring
    G02291567Courtesy of MAZDA MOTORS CORP.
  1. Apply a coat of ATF to a new seal ring and new O-ring, then install them to the 2-4 brake piston.
scientia non olet · About LEMON Manuals