LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 237 (Engine Mechanical [Intake-Air System]) >> Intake Manifold Disassembly/Assembly >> VDI Valve Assembly Note

VDI Valve Assembly Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply grease to the VDI valve end as shown in the figure.
    Fig 1: Applying Grease To VDI Valve End
    G01345714Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals