Fuel-Filler Lid Adjustment
WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Measure the gap and height difference between the fuel-filler lid and the body.
- Loosen the fuel-filler lid installation bolts, and adjust the fuel-filler lid.
Courtesy of MAZDA MOTORS CORP.
Standard clearance
- 1.7-3.7 mm {0.07-0.14 in}
- -0.5-1.5 mm {-0.01-0.05 in}
- -1.0-1.0 mm {-0.03-0.03 in}
- 1.8-3.8 mm {0.08-0.14 in}
- 1.7-3.7 mm {0.07-0.14 in}
- -0.8-1.2 mm {-0.03-0.04 in}
- Tighten the bolts.