LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Automatic Transmission [Service, Removal & Installation)) >> Oil Cooler Removal/Installation >> Radiator (In Tank Oil Cooler) Installation Note

Radiator (In Tank Oil Cooler) Installation Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. The automatic transmission oil cooler flushing must be performed whenever a transmission is removed for service because the existing fluid may be contaminated, and to prevent contamination of new fluid.
    NOTE:
    • Flushing must be performed after installation of the overhauled or replaced transmission.
  2. Follow manufacturer's instructions for flushing operation.
scientia non olet · About LEMON Manuals