LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 221 (Automatic Transmission [Service, Removal & Installation)) >> Oil Cooler Disassembly/Assembly >> Drive Plate Removal Note

Drive Plate Removal Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the SST  against the engine.
  2. Remove the bolts and the drive plate.
    Fig 1: Setting Special Tool Against Engine & Removing Bolts & Drive Plate
    G01346908Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals