LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 208 (Engine Mechanical (Service Information)) >> Engine Tune-Up >> Engine Tune-Up Preparation

Engine Tune-Up Preparation

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn off the electrical loads.
  2. Warm up the engine as follows.
    1. Start the engine.
    2. Maintain the engine speed at 2,500-3,000 RPM  until the cooling fans start to operate.
    3. Release the accelerator pedal.
    4. Wait until the cooling fans stop.
  3. Connect the WDS or equivalent to the DLC-2.
    Fig 1: Connecting WDS To DLC-2
    G00993575Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals