LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Engine Mechanical [Lubrication System]) >> Oil Pan Removal/Installation >> Oil Pan Gasket Installation Note

Oil Pan Gasket Installation Note

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The oil pan must be installed and the bolts tightened within 4 min  of silicone sealant application.
  1. Apply silicone sealant to the cylinder block as shown.
    Fig 1: Applying Silicone Sealant To Cylinder Block
    G00998043Courtesy of MAZDA MOTORS CORP.

    Dot Diameter 

    10 mm {0.39 in}