Rear Tilt Motor Inspection

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the rear tilt motor connector.
Inspect the rear tilt motor operation when B+ is applied to the terminals as shown.
- If not as specified, replace the seat cushion frame.
Fig 1: Identifying Rear Tilt Motor Operation
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Rear Tilt Motor Circuit, Terminals & Connector View
Courtesy of MAZDA MOTORS CORP.