Disassembly & Reassembly: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2002 Mazda Tribute, 2002 Mazda Millenia, 2002 Mazda 626, 2001 Mazda Tribute, and 2001 Mazda Protege. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Steering gear cannot be disassembled on Tribute models. If defective, a new steering gear must be installed.
- Remove steering gear assembly. See STEERING GEAR under REMOVAL & INSTALLATION. As an aid to disassembly and reassembly, use illustrations. See Figure-Figure . For reassembly reference, keep components in order of disassembly. Replace worn or damaged components as necessary.
- On all models, after steering rack reassembly, but before installing tie rods, check pinion preload. See PINION PRELOAD under ADJUSTMENTS.