LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 183 (Doors And Liftgate) >> Sliding Door Circuit Contact Removal/Installation >> Door Side

Door Side

WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the sliding door trim. (See SLIDING DOOR TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the sliding door circuit contact connector.
  4. Remove the bolts.
  5. Remove the sliding door circuit contact.
    Fig 1: Removing/Installing Sliding Door Circuit Contact - Door Side
    G00997899Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals