LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2013 >> 5 Grand Touring >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Automatic Transaxle [Service, Removal & Installation FN4A-El)) >> Automatic Transaxle Removal/Installation >> No.1 Engine Mount Bracket Removal Note

No.1 Engine Mount Bracket Removal Note

WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Support the engine using the SST  before removing the No.1 engine mount.
  2. Remove the No.1 engine mount.
Fig 1: Supporting Engine Using SST
G01011934Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals