Clutch Pedal Disengagement Point
WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the parking brake and fix the front and rear of the wheels with the wheel chocks.
- Start the engine at idle.
- Without depressing the clutch pedal, move the shift lever slowly to the reverse position.
- Hold the lever when the gear noise is heard.
- Depress the clutch pedal slowly.
- Hold the pedal when the gear noise stops (clutch pedal disengagement point).
- Measure distance A (the distance from the clutch pedal disengagement point to the fully depressed position) and the pedal stroke. See Fig 1.
- Verify that they are within specification.
- If distance A or the pedal stroke is out of specification, adjust the pedal height or the clutch pedal free play to specification.
Clutch pedal disengagement stroke
Minimum: 20 mm {0.79 in} (Reference value)
Pedal stroke
140 mm {5.51 in} (Reference value)