No. 4 Engine Mount Bracket & No. 4 Engine Mount Rubber Installation Note
WARNING: This page is about a different car, the 2004 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Tighten the No. 4 engine mount bracket and No. 4 engine mount rubber bolt and nut in the order as shown.
TIGHTENING TORQUE SPECIFICATION
| Bolt & Nut No. |
N.m {kgf.m, ft.lbf} |
| 1, 2, 3 |
58.8-80.4 {6.0-8.1, 43.3-58.5} |
| 4, 5, 6 |
66.6-93.1 {6.80-9.49,49.2-68.6} |
Courtesy of MAZDA MOTORS CORP.